TESTEC Logo Generalimporteur für B+K Precision Produkte
STARTSEITEHERSTELLERPRODUKTEVERTRIEBEKUNDENDOWNLOADSKONTAKT
 HerstellerProdukte 

TESTEC
Hameg
B+K PRECISION
Multimeter
Labornetzgeräte
Elektronische Last
bis 600W
bis 5000W
Spektrum Analyzer
Funktionsgeneratoren
Frequenzzähler
LCR Meter
Oszilloskope
Electro PJP
Multi-Contact
Produktübersicht
Gebrauchtgeräte
Produktkataloge
 

Elektronische Last
bis 600W
BK-8500   300W Programmable DC Electronic Load The model 8500 is an affordable full-featured Programmable Electronic DC Load with a high degree of accuracy and great display resolution. They are great units for DC Power Supply and DC-DC Converter testing and calibration. Because the are fully programmable via the RS 232 or optional USB interface they are ideal for Automated Test Systems.

- High Resolution 0.1mA/1mV (range dependent)
- VFD Display
- CV/CC/CW/CR Operation
- Over-Current/Over-Voltage/Over-Power/Over-Temperature Protected
- RS 232 Interface Cable and Software Included
- Optional USB Interface Available (order IT-E132)
- Thermostat Controlled Internal Fan
- Connect multiple units together in either parallel or series to increase power rating
PDF-Datei Datenblatt EN | PDF-Datei Bedienungsanleitung DE |  Technische Daten EN
Artikelnummer: BK-8500
listpreisNetto-Listenpreis: € 1.062,00
BK-8510   600W Programmable DC Electronic Load The model 8510 is a cost effective Programmable Electronic DC Load with a high degree of accuracy, great display resolution and a wide operating range of up to 120A or 120V, 600W max. The 8510 is well suited for testing and calibrating DC Power supplies, DC-DC Converters and batteries. Programmability via the RS 232 or optional USB interface makes the units ideal for the use in Automated Test Systems.

- Operates between 0-120VDC, 1mA-120A (600W max)
- High resolution 0.1mA/1mV (range dependent)
- Bright, easy to read display (VFD technology)
- CV/CC/CW/CR operation
- Over-Current/Over-Voltage/Over-Power/Over-Temperature Protected
- RS 232 Interface cable and software included
- Optional USB interface available (order IT-E132)
- Thermostat controlled internal fan
- Battery test capability
- Create complex test sequences without the need of an external PC
PDF-Datei Datenblatt EN | PDF-Datei Bedienungsanleitung DE
Artikelnummer: BK-8510
listpreisNetto-Listenpreis: € 2.076,00
BK-8512   600W Programmable DC Electronic Load The affordable, laboratory grade model 8512 Programmable DC Electronic Load is well suited for testing and evaluating a wide variety of DC power sources. This DC electronic load can operate in CC, CV, CR or CP mode while voltage/current or resistance/power values are measured and displayed in real time and is fully programmable via RS232 or optional USB interface. Extensive protection, including over temperature, over power, over voltage, over current and reverse polarity will help protect your valuable prototype. Its flexible operating modes and excellent measurement accuracy make this DC electronic load a great choice for characterizing DC Power supplies, DC-DC Converters, batteries, fuel cells and solar cells.

- Operates between 0-500 VDC (suitable for high voltage applications), 1 mA-30 A, 600 W max
- Constant current (CC), resistance (CR), voltage (CV) and power (CP) operation
- Built-in high resolution (0.1 mA/1 mV) voltage and current measurement (range dependant)
- Bright, easy to read display (VFD technology)
- Built-in transient generator
- Programmable via RS232 interface. RS232 to TTL serial converter cable and application software included
- Optional USB communication adapter available (order IT-E132)
- List mode operation for increased throughput.
- Battery testing mode to provide Ah rating of battery
- Flexible triggering - Create trigger events by front panel keystroke, back panel TTL signal or software
- Connect multiple units in parallel to increase current rating
- Remote sense
PDF-Datei Datenblatt EN | PDF-Datei Bedienungsanleitung DE
Artikelnummer: BK-8512
listpreisNetto-Listenpreis: € 2.499,00
BK-8502   300W Programmable DC Electronic Load The affordable, laboratory grade model 8502 Programmable DC Electronic Load is well suited for testing and evaluating a wide variety of DC power sources. This DC electronic load can operate in CC, CV, CR or CP mode while voltage/current or resistance/power values are measured and displayed in real time and is fully programmable via RS232 or optional USB interface. Extensive protection, including over temperature, over power, over voltage, over current and reverse polarity will help protect your valuable prototype. Its flexible operating modes and excellent measurement accuracy make this DC electronic load a great choice for characterizing DC Power supplies, DC-DC Converters, batteries, fuel cells and solar cells.

- Operates between 0-500 VDC (suitable for high voltage applications), 1 mA-15 A, 300 W max
- Constant current (CC), resistance (CR), voltage (CV) and power (CP) operation
- Built-in high resolution (0.1 mA/1 mV) voltage and current measurement (range dependant)
- Bright, easy to read display (VFD technology)
- Built-in transient generator
- Programmable via RS232 interface. RS232 to TTL serial converter cable and application software included
- Optional USB communication adapter available (order IT-E132)
- List mode operation for increased throughput.
- Battery testing mode to provide Ah rating of battery
- Flexible triggering - Create trigger events by front panel keystroke, back panel TTL signal or software
- Connect multiple units in parallel to increase current rating
- Remote sense
PDF-Datei Datenblatt EN | PDF-Datei Bedienungsanleitung DE
Artikelnummer: BK-8502
listpreisNetto-Listenpreis: € 1.102,00
BK-8540   150 W DC Electronic Load The 8540 DC electronic load is a very compact, economically priced instrument that is at home on both the bench and the production floor. Though this is an instrument in a small package, it can reliably test a 5 volt power supply to 30 amps and do it continuously. The load can operate in CC, CV or CR mode while voltage/current or resistance/power values are measured and displayed in real time, making it well suited to test a variety of DC power sources. The 8540's performance is comparable to most full size bench DC electronic loads, yet it does the job at half the price and takes up half the space on your bench.

- Operates between 0-60 VDC, 1 mA-30 A (150 W maximum)
- Easy operation
- Bright, easy-to-read display
- Very compact and light weight
- Two current ranges: 3 A (1 mA resolution) and 30 A (10 mA resolution)
PDF-Datei Datenblatt EN | PDF-Datei Bedienungsanleitung EN
Artikelnummer: BK-8540
listpreisNetto-Listenpreis: € 602,00

Technische Änderungen vorbehalten.
englishdrucken
© TESTEC Elektronik GmbH - Hotline +49 (0)69 9433350Über uns | AGB | Impressum | Design by Bitmanufaktur