TESTEC Logo Generalimporteur für B+K Precision Produkte
STARTSEITEHERSTELLERPRODUKTEVERTRIEBEKUNDENDOWNLOADSKONTAKT
 HerstellerProdukte 

TESTEC
Hameg
B+K PRECISION
Multimeter
Labornetzgeräte
Labornetzgeräte 1-Ausgang
Labornetzgeräte programmierbar
1-Ausgang
Labornetzgeräte programmierbar 3-Ausgänge
Hochleistungs Labornetzgeräte
Elektronische Last
Spektrum Analyzer
Funktionsgeneratoren
Frequenzzähler
LCR Meter
Oszilloskope
Electro PJP
Multi-Contact
Produktübersicht
Gebrauchtgeräte
Produktkataloge
 

Labornetzgeräte
Hochleistungs Labornetzgeräte
BK-9150   5.2V/60A Programmable DC Power Supply The 9150 is a high performance linear-regulated 5.2V/60A programmable DC power supply that provides excellent performance and features not found in other supplies in this price category. This power supply was designed for applications in design verification, production or university labs that require high yet clean and reliable power, combined with excellent resolution, accuracy and fast transient response time.

- Very low ripple and noise due to linear regulation
- Excellent display resolution
- Fast transient response time (<100 µs)
- Programmable via USB and RS232 using SCPI compatible command set
- Closed case calibration
- List mode operation for increased throughput
- Very quiet due to intelligent fan speed control
- For bench use or rack mountable
- Application Software for front panel emulation and simple test sequence generation included
- Digital port with Remote Inhibit (RI) useful for turning multiple power supplies On/Off simultaneously
- Over voltage protection
- Digital Volt Meter and Milliohm Meter
PDF-Datei Datenblatt EN | PDF-Datei Bedienungsanleitung EN
Artikelnummer: BK-9150
listpreisNetto-Listenpreis: € 1.790,00
BK-9151   20V/27A Programmable DC Power Supply The 9151is a high performance linear-regulated 20V/27A programmable DC power supply that provides excellent performance and features not found in other supplies in this price category. This power supply was designed for applications in design verification, production or university labs that require high yet clean and reliable power, combined with excellent resolution, accuracy and fast transient response time.

- Very low ripple and noise due to linear regulation
- Excellent display resolution
- Fast transient response time (<120µs)
- Programmable via USB and RS232 using SCPI compatible command set
- Closed case calibration
- List mode operation for increased throughput
- Very quiet due to intelligent fan speed control
- For bench use or rack mountable
- Application Software for front panel emulation and simple test sequence generation included
- Digital port with Remote Inhibit (RI) useful for turning multiple power supplies On/Off simultaneously
- Over voltage protection
- Digital Volt Meter and Milliohm Meter
PDF-Datei Datenblatt EN | PDF-Datei Bedienungsanleitung EN
Artikelnummer: BK-9151
listpreisNetto-Listenpreis: € 1.650,00
BK-9152   30V/18A Programmable DC Power Supply The 9152is a high performance linear-regulated 30V/18A programmable DC power supply that provides excellent performance and features not found in other supplies in this price category. This power supply was designed for applications in design verification, production or university labs that require high yet clean and reliable power, combined with excellent resolution, accuracy and fast transient response time.

- Very low ripple and noise due to linear regulation
- Excellent display resolution
- Fast transient response time (<100 µs)
- Programmable via USB and RS232 using SCPI compatible command set
- Closed case calibration
- List mode operation for increased throughput
- Very quiet due to intelligent fan speed control
- For bench use or rack mountable
- Application Software for front panel emulation and simple test sequence generation included
- Digital port with Remote Inhibit (RI) useful for turning multiple power supplies On/Off simultaneously
- Over voltage protection
- Digital Volt Meter and Milliohm Meter
PDF-Datei Datenblatt EN | PDF-Datei Bedienungsanleitung EN
Artikelnummer: BK-9152
listpreisNetto-Listenpreis: € 1.650,00
BK-9153   60V/9A Programmable DC Power Supply The 9153is a high performance linear-regulated 60V/9A programmable DC power supply that provides excellent performance and features not found in other supplies in this price category. This power supply was designed for applications in design verification, production or university labs that require high yet clean and reliable power, combined with excellent resolution, accuracy and fast transient response time.

- Very low ripple and noise due to linear regulation
- Excellent display resolution
- Fast transient response time (<50µs)
- Programmable via USB and RS232 using SCPI compatible command set
- Closed case calibration
- List mode operation for increased throughput
- Very quiet due to intelligent fan speed control
- For bench use or rack mountable
- Application Software for front panel emulation and simple test sequence generation included
- Digital port with Remote Inhibit (RI) useful for turning multiple power supplies On/Off simultaneously
- Over voltage protection
- Digital Volt Meter and Milliohm Meter
PDF-Datei Datenblatt EN | PDF-Datei Bedienungsanleitung EN
Artikelnummer: BK-9153
listpreisNetto-Listenpreis: € 1.650,00
BK-XLN10014   100V / 14.4A 1.44kW Programmable DC Power Supply The XLN10014 programmable DC power supply delivers up to 1440 watts of clean power on a single output. The compact 1U high 19 inch wide supply was designed to meet the needs of both system integrators and bench top users. Cost effective USB & RS485 interfaces combined with fast average command processing times of less than 50 ms make the XLN series ideal for ATE applications. Bench top users will benefit from the built-in voltage and current meters displaying setting and output values concurrently, as well as an intuitive user interface with full keypad and rotary knob.

The XLN10014 is perfectly suited for ATE systems integration, product design and development, product QC and burn-in testing, production, electro-plating and other applications requiring high, reliable power.

- Compact, high density, 1U package
- USB and RS485 Interface
- External analog programming interface
- Easy to configure master/slave mode for series & parallel connection of up to 4 units
- Control up to 31 power supplies from one PC synchronized via the RS485 interface
- Application software providing remote control capabilities included
- Programmable voltage and current slew rate allow for "soft starting" of loads
- LabVIEW (TM) drivers available
- 5 V/1 A fixed output for auxiliary output
PDF-Datei Datenblatt EN
Artikelnummer: BK-XLN10014
listpreisNetto-Listenpreis: € 2.050,00
BK-XLN10014-GL   100V / 14.4A 1.44kW Programmable DC Power Supply with GPIB/LAN Interface
Artikelnummer: BK-XLN10014-GL
listpreisNetto-Listenpreis: € 2.350,00
BK-XLN3640   36V / 40A 1.44kW Programmable DC Power Supply The XLN3640 programmable DC power supply delivers up to 1440 watts of clean power on a single output. The compact 1U high 19 inch wide supply was designed to meet the needs of both system integrators and bench top users. Cost effective USB & RS485 interfaces combined with fast average command processing times of less than 50 ms make the XLN series ideal for ATE applications. Bench top users will benefit from the built-in voltage and current meters displaying setting and output values concurrently, as well as an intuitive user interface with full keypad and rotary knob.

The XLN3640 is perfectly suited for ATE systems integration, product design and development, product QC and burn-in testing, production, electro-plating and other applications requiring high, reliable power.

- Compact, high density, 1U package
- USB and RS485 Interface
- External analog programming interface
- Easy to configure master/slave mode for series & parallel connection of up to 4 units
- Control up to 31 power supplies from one PC synchronized via the RS485 interface
- Application software providing remote control capabilities included
- Programmable voltage and current slew rate allow for "soft starting" of loads
- LabVIEW (TM) drivers available
- 5 V/1 A fixed output for auxiliary output
PDF-Datei Datenblatt EN
Artikelnummer: BK-XLN3640
listpreisNetto-Listenpreis: € 2.050,00
BK-XLN3640-GL   36V / 40A 1.44kW Programmable DC Power Supply with GPIB/LAN Interface
Artikelnummer: BK-XLN3640-GL
listpreisNetto-Listenpreis: € 2.350,00
BK-XLN6024   60V / 24A 1.44kW Programmable DC Power Supply The XLN6024 programmable DC power supply delivers up to 1440 watts of clean power on a single output. The compact 1U high 19 inch wide supply was designed to meet the needs of both system integrators and bench top users. Cost effective USB & RS485 interfaces combined with fast average command processing times of less than 50 ms make the XLN series ideal for ATE applications. Bench top users will benefit from the built-in voltage and current meters displaying setting and output values concurrently, as well as an intuitive user interface with full keypad and rotary knob.

The XLN6024 is perfectly suited for ATE systems integration, product design and development, product QC and burn-in testing, production, electro-plating and other applications requiring high, reliable power.

- Compact, high density, 1U package
- USB and RS485 Interface
- External analog programming interface
- Easy to configure master/slave mode for series & parallel connection of up to 4 units
- Control up to 31 power supplies from one PC synchronized via the RS485 interface
- Application software providing remote control capabilities included
- Programmable voltage and current slew rate allow for "soft starting" of loads
- LabVIEW (TM) drivers available
- 5 V/1 A fixed output for auxiliary output
PDF-Datei Datenblatt EN
Artikelnummer: BK-XLN6024
listpreisNetto-Listenpreis: € 2.050,00
BK-XLN6024-GL   60V / 24A 1.44kW Programmable DC Power Supply with GPIB/LAN Interface
Artikelnummer: BK-XLN6024-GL
listpreisNetto-Listenpreis: € 2.350,00
BK-XLN8018   80V / 18A 1.44kW Programmable DC Power Supply The XLN8018 programmable DC power supply delivers up to 1440 watts of clean power on a single output. The compact 1U high 19 inch wide supply was designed to meet the needs of both system integrators and bench top users. Cost effective USB & RS485 interfaces combined with fast average command processing times of less than 50 ms make the XLN series ideal for ATE applications. Bench top users will benefit from the built-in voltage and current meters displaying setting and output values concurrently, as well as an intuitive user interface with full keypad and rotary knob.

The XLN8018 is perfectly suited for ATE systems integration, product design and development, product QC and burn-in testing, production, electro-plating and other applications requiring high, reliable power.

- Compact, high density, 1U package
- USB and RS485 Interface
- External analog programming interface
- Easy to configure master/slave mode for series & parallel connection of up to 4 units
- Control up to 31 power supplies from one PC synchronized via the RS485 interface
- Application software providing remote control capabilities included
- Programmable voltage and current slew rate allow for "soft starting" of loads
- LabVIEW (TM) drivers available
- 5 V/1 A fixed output for auxiliary output
PDF-Datei Datenblatt EN
Artikelnummer: BK-XLN8018
listpreisNetto-Listenpreis: € 2.050,00
BK-XLN8018-GL   80V / 18A 1.44kW Programmable DC Power Supply with GPIB/LAN Interface
Artikelnummer: BK-XLN8018-GL
listpreisNetto-Listenpreis: € 2.350,00

Technische Änderungen vorbehalten.
englishdrucken
© TESTEC Elektronik GmbH - Hotline +49 (0)69 9433350Über uns | AGB | Impressum | Design by Bitmanufaktur